Common features of MX 4100 and MX 4200 safety light curtain:
● Supply voltage: 24 VDC
● Enclosure rating (IEC 60529): IP 65 Operating temperature: 0 °C to 50°C
● Detection capability: 14 mm for finger protection 22 mm, 30 mm and 38 mm for hand protection 82 mm for body protection
● Protective field height: 300 mm to 1800 mm
● Maximum range 10 m, depending on model
● Start/ Restart Interlock, selectable.
● EDM: External Device Monitoring, selectable.
● OSSD two separate safety outputs.
● Easy set-up, no separate software or computer required
● Individual indicators for each beam
● Solid Aluminium construction
Specific features of the MX 4200 safety light curtain:
● Fixed monitored blanking
● Fixed partially monitored blanking
● Floating blanking Configurable tolerances for all blanking modes
● Muting
Some common applications:
● Presses, bending and cutting machines
● Automatic or semi automatic assembly lines
● Packaging and welding machines
● Robots and robotic applications
MX SAFETY LIGHT CURTAINS PARAMETERIZATION / TEACH TOOL
EASY TO USE PARAMETERIZATION TOOL
- Turn the selector switch to the program position
- Watch the segment display on the detector column for information on your setting
- Press the teach button according to the instruction in your manual
- Important, return the selector to run position and remove key when not being used
It’s that easy – no laptops required.
The factory set guarding parameters can be changed. The MX series of safety light curtains utilize a hand-held easy-to-access and easy-to-use teach tool. The advantages of portable designed unit will be very apparent when compared to some competitive models use tiny DIP switches typically located at the bottom of the detector units and often making it very inconvenient to access them, while other models require use of a laptop computer.
FUNCTIONS SET WITH TOOL
- Display Orientation
- Scan Code
- Interlock Function
- EDM Function
- Auxiliary Outputs
- Muting Function Signaling
- Blanking Tolerance, Positive
- Blanking Tolerance, Negative
- Floating Mode
MULTIPLE INDICATORS
The MX series of safety light curtains are designed with multiple indicators to facilitate its use and indicate the status of each of the unit at any given time.
INDICATORS
- Each individual beam status indicators
3 Bright LED Indicators
- Red or Green for status
- Blue Solid indicates active blanking mode
- Blue flashing indicates muting
- Yellow Solid indicating lock-out condition
- Yellow flashing for interlock condition is engaged
7 Segment display is turned on when required for additional information and system errors
Wiring MX Series Safety Light Curtain
With the use of pre-wired junction block the only wiring needed is connecting the 4/5 wires to your power source and the OSSD outputs. These JB junction blocks are invaluable tools that will make the installing a pair of MX safety light curtains easier and less time consuming. Junction blocks are available in 4, 6 & 8 port connections. These junction blocks will also save you on the need to acquire the more costly larger cables required for a direct connection to your control box. As well, adding and removing a function will be an easier task and will not require any rewiring work.
We provide stop-time measurements on mechanical or hydraulic press and press brakes.
Stopping times are used to properly calculate the safe distance from point of operation.
I. M. Services offers turn-key installation, sales and service for the MX Series Safety Light Curtains.
Please contact us for a quote or for more information.
For Press Brake guarding please see the Merlin 4000 Safety Light Curtain.
For more information on ISB products click this link: http://isblite.com
The MX Series Safety Light Curtains comply with the requirements of the relevant (Type 4 acc. IEC 61496-1/2, Cat. 4 / PL e acc. to EN ISO 13849-1, SIL CL 3 acc. to EN 62061 / IEC 61508) and can be used in applications up to Cat.4 / PL e acc. to EN ISO 13849-1 and SIL 3 acc. to EN 62061 / IEC 61508.
